Upholstery // Part 2

If you haven't already, please take a look at part 1 of this project, as today's post is part 2!! After completing the base section & one of the wings, we then had to work on the other wing, the back, the front, the arms & the cushion - so much sewing & piping! This was a lot to take on and for some reason me & my Gran thought this was doable in two days. Turns out it really wasn't, but we have managed to completed both of the wings, the front & the back (so only the arms & the cushion left to sew). 

To make it feel a little more like we had actually made some progress, we spent most of yesterday putting it all together. You can use tacking pins, but we used a staple gun, a glue gun when needed and plenty of wadding & foam for extra padding. I won't lie, it was much more difficult than I expected. You have to make small cuts so that the material doesn't pucker when you're pulling it through to the back of the chair, which is so nerve-wracking when you're making something for someone else (in material that they have paid for)! The area around the legs is the most challenging, as it's the area that everyone will notice/see if the fabric is wonky or puckered. It's also really important to make sure the grain of the material is always going in the same direction! When we were attaching the wings, the grain on one of them was vertical whilst the other was pulling diagonally. With the type of material we were using, it may not have been noticeable to many, but as this is for my sister it would annoy me everytime I go over to her house, so I had to unpick the wing and sew it back together so it was correct. It is definitely worth taking your time and doing it properly on a project like this - you definitely need to have a lot of patience.

It's taken a little longer than we had planned, but I will hopefully be able to share with you all the finished chair in the next few days! Horaay! What do you all think so far?

♥  

ZoFlo

Pumpkin Carving // A Night of Hope

I never usually carve a pumpkin for Halloween, but this year I really wanted to do one (big kid)! I saw that World Vision were raising money & awareness by carving something a little different in their pumpkins this year. I thought this was a great idea & immediately wanted to get involved in such a great cause. 

World Vision is the largest international children's charity & this year they are asking everyone to carve a heart in their Pumpkin for "A Night of Hope" - raising money for the child refugees in Syria. I thought this was a great idea, as typically Halloween is a night for the children. For them to have fun, enjoying the normalities of life. My carving tools of choice were a knife, a tablespoon and a teaspoon - be super careful using the knife! I got Nick to cut off the top for me and then I hollowed out the pumpkin and drew my design on the front before cutting it out. At first I was a little dissappointed, but it looks so much better when the candles are inside! I am actually really pleased with the way it turned out.

So if you want to do something a little different this year, carve a heart in your pumpkin & text Heart8 to 70060 to donate £5 to World Vision. I am sure you're wondering how your donation will benefit the children of Syria..? Well the money you donate will go towards schools and educational equipment, to help give the children hope for the future - hense being "A Night of Hope". 

What do you think of my heart design pumpkin? (Nicks is the "scary face" pumpkin - obviously)!  Don't forget to upload your photos to Twitter using the hashtag #ANightOfHope or on Facebook for everyone to see your design too! 

♥  

ZoFlo

Christmas Stocking // Fantastic Ribbons*

 I have recently been sent some lovely festive Ribbon from Fantastic Ribbons and as I am feeling (prematurely) Christmassy, I thought I would have a play and see what I could create using it. I was sent two different types, one which said "Do Not Open until 25th December" and the other said "Santa Claus is Coming to Town" - Super Cute!

 After much contemplating, I decided it would be a great addition to a Christmas Stocking - something I have never made before! I had some red fabric lying around and to make it look that little bit more festive, I used some material that I got free from Sew! I thought the ribbon would look great to separate the two different fabrics.

You can't see in the above photo, but I used the "Santa Claus" Ribbon to make a small loop so the stocking can be hung up on a bed post / by the fire on Christmas Eve, ready for Santa to fill it with goodies!! Fantastic Ribbons have such a great range of Christmas Ribbon - head on over to their website and take a look before it's too late!

What do you think of my Christmas Stocking? What will you be creating with your Christmas Ribbon?

♥  

ZoFlo

I was sent:

15mm Twill Ribbon Do Not Open until 25th December

15mm Twill Ribbon Santa Claus is Coming to Town

How To Make // Christmas Bunting

I am sure half of you are thinking "it's too soon" whilst the other half are thinking "it's never too soon"! I'm afraid I am with the latter as I am so excited for Christmas this year! So you can imagine my delight when the October issue of Sew arrived through the post filled with Christmas themed ideas and free Christmas fabric! There was a selection of 4 projects & I was immediately drawn to the Christmas "Mitten" Bunting as I thought it was so cute and unusual. It was really simple to make and such a fantastic idea that I had to share it with you all...

To make the Christmas Bunting you will need:

2 contrasting (Christmas appropriate) fabrics

6 Buttons

Red & White Twine

White Thread
Iron
Sewing Machine (although you could hand sew if you prefer)

1. I began by tracing the mitten template in the Sew Magazine (October Issues), but if you don't have this, then I am sure you could find one online or make your own. I then cut out 12 mittens shapes, which will eventually make 6 mittens (3 in each fabric).Be sure to cut your fabric correctly if it is patterned, so the pattern is running in the correct direction.
2. Pin the mittens together, right sides facing, and sew together, leaving the bottom (straight edge) unsewn. Turn them the right way out and iron to create your perfect mitten.
3. I then cut out six 3.5cm x 11cm cuffs, 3 from one fabric & 3 from the other. Fold over 6mm at each short edge & iron to press in place. Do the same with the long edges.
4. Fold the cuff in half and place over the top of the contrasting mitten. Make sure the fold is on the same side on each mitten (so mine is on the opposite side to the thumb).
5. Sew on the buttons - again, making sure these are on the same side on each mitten.
6. Hand stitch each mitten to the twine, keeping the spacing between each one the same.

What do you think? I thought they were super easy and so cute! I just can't wait until the festive season properly begins so I can put them up in the house! Check out the Sew website to see what other sewing projects they have. I'm sure (I hope) they will have plenty of Christmas ones soon!

If you have made these, or anything similar, please let me know in the comments box below.

♥  

ZoFlo

Upholstery // Part 1

Upholstery has always been something that interests me but I wouldn't have a clue where to begin and at the moment I just don't have the time (or spare pennies) to go on a course to learn. My Gran, however, has done a course and dabbles with the odd upholstery project, so I thought it would be rude to not get involved and offer a helping (or hindering) hand!

Unfortunately, I don't have a photograph of the chair before we started as I kind of just began by offering to help out and didn't think it could be a potential blog post. But we began by stripping the chair completely back to the frame (leaving the foam padding on there too). We had to remove the staples carefully though as we intended to use each piece of the old material to create a pattern for the new material. This was the most tiring part and after a while became a little tedious - it definitely helped having two people do this!

Next, I made alot of piping! My Gran wanted us to make it ourselves so it matched the chair perfectly. We followed some instructions we found on Make it & Love it (click here to read) using the same fabric we were using to cover the chair. Making piping is super easy - I will definitely be using this for future projects! Then came the difficult part. We unpicked the different sections of the old material to get the correct measurements for the new material. This took a little while and I double checked everything to be sure that we wouldn't get it wrong! So far we have completed the bottom section and one of the wings.

This is such a massive project and we are yet to find the time to finish it - turns out Grandparents have very busy lives too - but when we have completed some more I will be sure to update you all with post number two (and maybe even number three)!! Have you ever done any upholstery?

♥  

ZoFlo

UpCycling // Chest of Drawers

A little while ago I did a post about some bedside cabinets (click here to read it just incase you missed it). It was my first upcycling project and I absolutely loved it! So when Nick & I decided we needed to get some furniture for the spare bedroom, I was more than happy to take on another upcycling project. I went on our local buying/selling Facebook page to find out if any one was selling a chest of drawers. I managed to find one that was perfect and paid only £20 for it!

After lots of sanding and 2 days of painting, I have finally completed it and I am really pleased with how it has turned out. Originally I wanted to do it exactly the same as the bedside cabinets, but decided it would be good to give something else a go. I have also thought about getting some different handles although I like the natural wood against the paint (Farrow & Ball New White)  - what do you think?

  Everything I used for this project (Paint, Sandpaper, Paint Brushes etc) we already had - perks of having a builder boyfriend - so this only cost me £20. Upcycling old, unwanted furniture is so cheap and a great way to personalise your home, as well as getting exactly what you want! Have you done any upcycling recently?

♥  

ZoFlo

Crafty Haul #2

I may have accidentally taken a trip to Hobbycraft last week...& accidentally made a few cheeky purchases! *Oops!*

Ever since I reviewed the Sizzix Texture Boutique Beginner Dye-Cutting kit back in May, I have been addicted to card making! It's so much more personal and I enjoy creating something unique for each person, so I needed to get a few bits & bobs to keep my card making top notch. I have listed below my purchases:

1 - Cardstock Pastel Book £5 - I can't seem to find a link for this one on Hobbycraft! But I had a few sheets of this paper that came with my Sizzix set, however it was running low. I love it too much so had to get myself some more. I opted for Pastel colours, as I tend to use these colours more often.

2 - Dress It Up Red Hot Heart Buttons £2 - As I was planning on making an engagement card, I wanted to get something to fit with the theme & these heart shaped buttons were perfect!

3 - Hobbycraft A4 Sentiment Strip Sheets By Stephanie Weightman 2Pk Black £2 - Originally I was looking for rub on words as I am running low, but they didn't have what I was looking for. I wasn't so sure about these to begin with, however when I got them home & started working with them I thought they were great! Although I will keep my eyes peeled for rub on ones too!

4 - Cuttlebug Embossing Folder Dotty Stems £6 - I have brought cheaper embossing folders before, but it really doesn't pay off. You can hardly see the print, even after putting it through the Dye-Cutter a few times. I would definitely recommend spending a little more and this one from Cuttlebug is so cute!

  Here are a couple of cards I have made with my new purchases - what do you think? Have you had any crafty hauls recently?

♥  

ZoFlo